Корзина
19 отзывов
Интернет - магазин Siemens Simatic S7-1200
+74957722355
+74957722355

MVI69E-MBS ProSoft модуль Modbus Serial

  • В наличии
  • Код: MVI69EMBS

1 573 

+74957722355
MVI69E-MBS ProSoft модуль Modbus Serial
MVI69E-MBS ProSoft модуль Modbus SerialВ наличии
1 573 
+74957722355
Купить

Описание

Модуль Modbus Serial

  • Поддержка контроллеров CompactLogix 1769 (шина версии 16 и выше)
  • Сохранение конфигурации как CompactLogix project (файл ACD)
  • Модуль работает как сопроцессор, снижая нагрузку на scan time ПЛК
  • Поддержка до 10’000 слов данных
  • До250 комманд Modbus на порт
  • Поддержка SCADA

 

Варианты написания заказного номера:

MVI69EMBS

MVI69E-MBS

 

 

Технические данные:

The MVI69E-MBS Modbus Serial module for CompactLogix™ is designed for all applications requiring Modbus Serial connectivity. This module comes with an Add-on Profile and an Add-on Instruction to reduce commissioning time. The MVI69E-MBS has two serial ports and can support both Master and/or Slave connectivity to interface with a variety of devices using the Modbus Protocol.

 

 


 Features       

* Supports CompactLogix processors with 1769 I/O bus capability version 16 and greater (MicroLogix 1500 not supported) 
* Add-on Instruction creates UDTs, providing logical definitions for I/O, status, and control data 
* Add-on Profile support, improving integration in the CompactLogix System 
* Diagnostic data available in processor controller tags, enabling decisions to be made based upon node health 
* Module configuration backed up in CompactLogix project (ACD file) 
* Module acts as a co-processor reducing impact to PLC scan time 
* Supports up to 10,000 words of data 
* Supports up to 250 Modbus Commands per port 
* Each port can be configured individually as a Modbus Master or Modbus Slave device 
* Supports Enron and Daniel-style Floating point data implementations 
* Suitable for SCADA and field device interface applications 

 
General Specifications 

      
Configuration ProSoft Configuration Builder        
I/O Size 60/120/240 - 16 bit integers        
Communication parameters     Baud Rate: 110 to 115K baud Stop Bits: 1 or 2 Data Size: 7 or 8 bits Parity: None, Even, Odd RTS Timing delays: 0 to 65535 milliseconds        
Modbus Modes     RTU mode (binary) with CRC-16 ASCII mode with LRC error checking        
Floating Point Data     Floating point data movement supported, including configurable support for Enron, Daniel®, and other implementations        
Modbus Function Codes Supported     1: Read Coil Status 2: Read Input Status 3: Read Holding Registers 4: Read Input Registers 5: Force (Write) Single Coil 6: Preset (Write) Single Holding Register 8: Diagnostics (Slave Only, Responds to Sub function 00)     15: Force( Write) Multiple Coils 16: Preset (Write) Multiple Holding Registers 17: Report Slave ID (Slave Only) 22: Mask Write Holding Register (Slave Only) 23: Read/Write Holding Registers (Slave Only)      
     

  

Modbus Master         
Command List     Up to 250 command per Master port, each fully configurable for function, slave address, register to/from addressing and word/bit count.        
Polling of command list     Configurable polling of command list, including continuous and on change of state.        
Status Data     Error codes available on an individual command basis. A slave status list is maintained per active Modbus Master port.      
  
Modbus Slave        
Node address     1 to 247 (software selectable)        
Status Data     Error codes, counters and port status available per configured slave port      
  


Hardware Specifications   
Dimensions     Standard 1769 Single-slot module        
Current Load     500 mA max @ 5 VDC 
Power supply distance rating of 4        
Operating Temp.     32° F to 140° F (0° C to 60°C)        
Storage Temp.     -40° F to 185° F (-40° C to 85° C)        
Relative Humidity     5% to 95% (with no condensation)        
LED Indicators     OK - Module Status 
ETH - Ethernet Communication 
P1 - Port 1 Serial Communication 
P2 - Port 2 Serial Communication 
BP - Backplane Connectivity 
CFG - Valid Configuration        
Debug Port     10/100 Ethernet Port (auto-negotiating)        
App Ports (P1,P2)     RS-232, RS-485 or RS-422 
RJ45 (DB-9F with supplied cable) 
RS-232 handshaking configurable 
500V Optical isolation from backplane        
Shipped with Unit     2 - RJ45 to DB-9M cables for application ports 
2 - DB-9F breakout boards      


 

 

Характеристики

Основные
Производитель  Prosoft-Systems
Страна производительСША
Вес0.23 кг
Гарантийный срок  12 мес

Информация для заказа

  • Цена: 1 573