1734-IB8S Allen-Bradley модуль дискретного ввода для базового блока POINT Guard I/O Safety Module

Модуль безопасности POINT Guard I/O

• 8 входов

• Под базовые блоки с 8 контактами

 

Варианты написания заказного номера:

1734IB8S

1734-IB8S

 

Description: POINT Guard I/O Safety Module - 8 Point Input Module (Compatible with terminal bases with 8 terminations)

 

Технические данные:

 

Voltage and current ratings

1734-IB8S, Series B

Field Power(2):

19.2...28.8V DC, 25mA (no load), SELV 150VA max

OUTPUT:

19.2...28.8V DC

700mA max per output @ 40 °C (104 °F)

500mA max per output @ 55 °C (131 °F)

2.8A max per module @ 40 °C (104 °F)

0.55A max per module @ 55 °C (131 °F)

INPUT(2):

11...30V DC, 3.5mA @ 40 °C (104 °F), SELV 150VA max

11...28.8V DC, 3.5mA @ 55 °C (131 °F), SELV 150VA max

BACKPLANE:

5V DC, 110mA

 

1734-IB8S Safety Input Status

Indicator Description Recommended Action

0…7 Off Safety input is off, or module is being configured. Turn on the safety input or reconfigure the channel, if desired.

Yellow Safety input is on. None.

Red A fault in the external wiring or input circuit has been detected. Check configuration, field wiring, and devices. If no problem found,

replace module.

Flashing red A fault in the partner input circuit of a dual-input configuration has been

detected.

Check the field wiring and verify your configuration for the partner

circuit. If no problem found, replace module.

 

 

Environmental Specifications These are the environmental specifications for the 1734-IB8S, 1734-OB8S,

1734-OBV2S, and 1734-IE4S modules.

Attribute Value

Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),

IEC 60068-2-2 (Test Bd, Operating Dry Heat),

IEC 60068-2-14 (Test Nb, Operating Thermal Shock):

-20…+55 °C (-4…+131 °F)(1)

Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),

IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),

IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock):

-40…+85 °C (-40…+185 °F)

Temperature, surrounding air, max 55 °C (131 °F)(1)

Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat):

5…95% noncondensing

Vibration IEC 60068-2-6, (Test Fc, Operating)

5 g @ 10…500 Hz

Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock) 30 g

Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock) 50 g

Corrosives 1734-IB8S and 1734-OB8S Series B only: G2 (ISA S71.04)

Emissions IEC 61000-6-4

ESD immunity IEC 61000-4-2:

4 kV contact discharges (1734-IB8S Series B, and 1734-OB8S, 1734-OBV2S

Series B only)

6 kV contact discharges (1734-IB8S, Series A; 1734-OB8S, Series A; and

1734-IE4S)

8 kV air discharges (all modules)

Radiated RF immunity IEC 61000-4-3:

10V/m with 1 kHz sine-wave 80% AM from 80…2000 MHz

10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz

10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz

3V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz

3V/m with 1 kHz sine-wave 80% AM from 2700…6000 MHz, 1734-OBV2S

EFT/B immunity IEC 61000-4-4:

Ѓ}3 kV @ 5 kHz on power ports (1734-IE4S only)

Ѓ}3 kV @ 5 kHz shielded on signal ports (1734-IE4S only)

Ѓ}2 kV @ 5 kHz on signal ports (1734-IB8S, 1734-OB8S only)

Surge transient immunity IEC 61000-4-5:

Ѓ}1 kV line-line (DM) and Ѓ}2 kV line-earth (CM) on signal ports

(1734-IB8S and 1734-OB8S only)

Ѓ} 1 kV line-line (DM) and Ѓ}2 kV line-earth (CM) on power ports

(1734-IE4S only)

Ѓ}2 kV line-earth (CM) on shielded ports (1734-IE4S only)

Conducted RF immunity IEC 61000-4-6:

10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz

 

 

 

Indicator Description Recommended Action 0…7

 

Off Safety input is off, or module is being configured. Turn on the safety input or reconfigure the channel, if desired. Yellow Safety input is on. None. Red A fault in the external wiring or input circuit has been detected. Check configuration, field wiring, and devices. If no problem found, replace module. Flashing red A fault in the partner input circuit of a dual-input configuration has been detected. Check the field wiring and verify your configuration for the partner circuit. If no problem found, replace module.