Корзина
15 отзывов
Интернет - магазин Siemens Simatic S7-1200
+74957722355
+74957722355

6DR4004-8J SIEMENS SIPART PS2 4–20 мA Плата для выдачи сигнала положения

  • В наличии
  • Код: 6DR40048J

252 

+74957722355
  • График работы
  • Адрес и контакты
6DR4004-8J SIEMENS SIPART PS2 4–20 мA Плата для выдачи сигнала положения
6DR4004-8J SIEMENS SIPART PS2 4–20 мA Плата для выдачи сигнала положенияВ наличии
252 
+74957722355
Купить

Описание

Плата для встраивания в электропневматический позиционер SIPART PS2,

 

  • Плата предназначена для выдачи сигнала положения,
  • Под сигнал 4–20 мA

 

 

Варианты написания заказного номера:

6DR40048J

6DR4004-8J

6DR 4004-8J

 

 

Iy module plug-in module for analog current output signal for SIPART PS2 electropneumatic positioner, position feedback, signal current 4-20 mA, simple to retrofit, not explosion-proof

Технические данные

Position feedback modules 6DR4004-6J and -8J

 

  • The optional position feedback module indicates the current position of the actuator as a two-wire signal between 4 mA and 20 mA. The position feedback module is electrically isolated from the basic device.
  • The current position is indicated as a passive mA signal only after successful initialization.
  • Operational faults are signaled by a fault current of 3.6 mA.

Position feedback module 6DR4004-6J (Ex) and 6DR4004-8J (not Ex), schematic representation

The position feedback module is:

  • Single channel
  • Potentially separated from the basic device.

 

=====

•             You are familiar with the general procedure described in the section "General information about the installation of option modules".

•             A supply source according to the technical data of the position feedback module must be available.

1.            Open the positioner as in the description depending on the device version:

  • Opening the standard and and intrinsically safe version
  • Opening the device version with "flameproof enclosure"

2.            Slide the position feedback module up to the endstop in the lower bay of the rack.

3.            Connect the module to the basic electronics. For this purpose, use the 6-pin flat ribbon cable provided.

4.            Close the positioner as in the description depending on the device version:

  • Closing the standard and and intrinsically safe version
  • Closing the device version with "flameproof enclosure"

Характеристики

Основные атрибуты
Производитель  Siemens AG
Страна производительРумыния
Гарантийный срок  12 мес

Информация для заказа

  • Цена: 252